• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device utilizes buttons in your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence up to 20 presses. This then authorizes the vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of aftermarket security devices that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your car. While a tracking system can assist in finding your car in the case of theft, it will not stop the crime from happening in the first place. Immobilisers, on the contrary is exactly what says on the tin: it disables your car's engine so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk, window or heater buttons. In addition to this option, there is an app for mobile devices that acts as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This is especially beneficial if you have to surrender your car to a valet service or parking since the immobiliser is activated and not disabled.

The Ghost is an unique and innovative device that operates with the buttons on your vehicle rather than as a standalone unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you own. This makes it a much better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a sophisticated security system that protects your pride and joy against key cloning, hacking & ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique that car thieves use to circumvent immobilisers.

The benefit of CAN data over traditional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons on your vehicle like the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. The sequence can be extended to 20 or more presses for extra security. The iPhone app lets you make a single, authorised connection with a pairing code that is unique to the Ghost and the communication between the two is secured.

The ghost immobilise (hogando.sakura.ne.jp officially announced) also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started when a valid PIN code has been entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can give your car to a valet or service without entering an entry code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a custom code. The system can be activated or deactivated through your smartphone's application without the need for additional wires.

The standard factory immobilisers work by using a transponder that is embedded in the key. It transmits a message to the ECU. If the correct code is sent, the car will start, but if a transponder is swapped with one from another vehicle the immobiliser will not recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It safeguards your car from key cloning, hacking and even key theft. The only way a thief could take your car is by physically towing it away and even then, they would not be capable of driving it.

Ghost utilizes the buttons of your car, such as the indicator stalk, steering wheel and door panels to generate an unique PIN code that is changeable that needs to be entered before you are able to use your car. This is done without the need for extra hardware such as key fobs and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals, which means thieves are unable to make use of sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.

ghost immobiliser and tracker is harder to remove than car alarms that require disarming using several buttons. This makes it a perfect complement to a GPS tracker which helps locate your car after it's been taken.

Override of emergency PIN code

You do not have to look long on social media sites to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle without the original keys.

Our Ghost immobiliser combats this issue and offers an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel, and centre console. This unique PIN has to be entered along with your original key fob in order to prevent the vehicle from getting started. The unique PIN for override is on the black card you will receive after installation. It's easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, so it isn't able to be recognized by criminals using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike most other security systems that have an engine relay bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This enables them to shut down the vehicle completely by sending a digital block of commands for both the ECU and the engine.

These systems can also be linked to a separate alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also compatible with valet/service modes and a great alternative to a tracker device when you take your car into the dealer for repairs to an electrical problem.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen without the owners keys. With easy access to key cloning equipment & door lock pick sets it is now much easier for thieves to take your joy and pride. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely silent as it does not use radio frequencies or key fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also stops you from adding an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, the centre console and door panels. Before you can begin your vehicle, you must enter a unique and changeable PIN code that can be as long as 20 digits.

This is the first aftermarket CAN bus immobiliser that was developed. It will prevent your vehicle from being started or driven when you don't enter a PIN code before entering. If the device is in armed and you attempt to drive off it will display an indicator on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point it will disarm the anti-hijack system and your vehicle will continue to operate in the normal way. If you do not enter your PIN at this point, the warning will continue to flash and require a new PIN code every attempt to start your vehicle.